Europe based Mega-Store of RC Helicopters, Drones, Planes

NEW: Fully digital gimbals

• Tough yet lightweight design
• High precision readout with 8 parameters per axis
• 3D sensor sampling (3 Hall sensors per axis)
• Fully integrated in VBar Control EVO software
• all-digital signal path, drift-free
• virtually latency-free
• supreme resolution
• perfectly linear
• temperature compensation per sensor
• earth magnetic field compensation
• super sensitive throughout the whole stick range
• factory calibrated
• adjustable stick response from smooth to extremely fast
• Made in Germany
  
  VBar Control EVO Highlights

• New processor: 600 MHz (Touch: 150 MHz), current chip production
• Latest technology ARM Cortex M7 with large caches and low power consumption
• Graphics processor (GPU)
• Internal flash disk 4 GB (Touch: 128 MB)
• Faster WIFI 802/b/g/n (3 times faster than before), very fast connection
• USB data transfers 10 times faster
• Improved Touch Display
• USB-C fast charging with 15 W with any off-the-shelf USB-C charger
• Extra fast and extra precise reaction to stick inputs due to faster processing

Note: The use of the VBar Control radio requires a VBar EVO or NEO or an RX Satellite with a legacy VBar or Mini-VBar unit with firmware version 6.0 PRO or higher. This version is free for all legacy devices as an incentive (but not for VBar EVO or VBar NEO), for anyone who purchases a VBar Control radio.

Software Highlights:

• Setup, programming and adjusting of VBar-controlled models accomplished directly via VBar Control radio.
• Readily understandable graphic user interface.
• Easy programming for new models.
• Easy ESC programming of many current ESCs directly from the radio.
• Up to eight parameters can be tuned simultaneously using the optional inputs, with adjustable limitation of the the respective range of values.
• Bank switching with three banks (fourth Bank Autorotation optional).
• Real time logging and real time graphic vibration analysis available on display.
• Graphical telemetry log analyzer for stored flights (overview, energy consumption, event-log) directly readable on the display.
• Create your own screendesign directly on the touchscreen display.
• Full manual available on the radio by means of context sensitive help.
• Easy bind process, allows bind and fly of any model equipped with VLink (e.g. a buddy‘s heli) with your own transmitter (Model Sharing).
• Automatic power-on, if an already bound model is switched on.
• Several telemetry functions are available, such as voltages, current, rpm, speed, temperature and power consumption of the batteries (may need additional hardware).
• Multiple timer functions available with warnings and reminders via sound, voice, or vibration output.
• Wireless buddy boxing with two VBar Control radios, fully configurable.
• Cloud functionality (e.g. for archiving, to manage model photos; usage optional).
• Access our App Store and do over-the-air online-updates via WiFi*.
• Over-the-air online-update your VBar EVO and VBar NEO-flybarless systems via WiFi* (for purchases, a device with internet access and web browser is required).
  
  Hardware Highlights:

• Extra bright capacitive 5.8 inch multi-touch color display, with ambient-light sensor to automatically control the brightness.
• Very good readability even in bright sunlight.
• WiFi module connects to your WiFi network at home as well as to your personal hotspot on the go.
• Very fast start-up time, from off to fully operational in one second.
• High perfomance low power controller for best user experience and long runtimes.
• Reliable 80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system.
• Unlimited model memory.
• Virtually unlimited number of control channels.
• High range, low latency, antenna diversity both on transmitter and receiver.
• Intelligent antenna monitoring and management.
• Fully equipped with four 3-position switches, two 3-position quick-break-switches as well as six rotary inputs (four trim wheels, two rotating knobs), all fully programmable.
• Precision gimbals with four ball bearings, fully adjustable.
• Collective stick can be equipped with optional throw limiter.
• Delicate rubber lining for comfortable, slip-free and safe holding.
• Well-balanced with two-point neck-strap attachment, no additional retainer bracked required.
• Large 2 Watt loudspeaker for alarms and voice output.
• Vibration alarm (adjustable).
• Memory accessible as a USB memory stick, no drivers needed.
• Built-in Lithium Polymer battery allows for long run times.
• Charge through USB connector.

* Online features require a WiFi connection and a device with internet access. Data transfers may cause additional costs, depending on your mobile data plan.

NEW: Fully digital gimbals

• Tough yet lightweight design
• High precision readout with 8 parameters per axis
• 3D sensor sampling (3 Hall sensors per axis)
• Fully integrated in VBar Control EVO software
• all-digital signal path, drift-free
• virtually latency-free
• supreme resolution
• perfectly linear
• temperature compensation per sensor
• earth magnetic field compensation
• super sensitive throughout the whole stick range
• factory calibrated
• adjustable stick response from smooth to extremely fast
• Made in Germany
  
  VBar Control EVO Highlights

• New processor: 600 MHz (Touch: 150 MHz), current chip production
• Latest technology ARM Cortex M7 with large caches and low power consumption
• Graphics processor (GPU)
• Internal flash disk 4 GB (Touch: 128 MB)
• Faster WIFI 802/b/g/n (3 times faster than before), very fast connection
• USB data transfers 10 times faster
• Improved Touch Display
• USB-C fast charging with 15 W with any off-the-shelf USB-C charger
• Extra fast and extra precise reaction to stick inputs due to faster processing

Note: The use of the VBar Control radio requires a VBar EVO or NEO or an RX Satellite with a legacy VBar or Mini-VBar unit with firmware version 6.0 PRO or higher. This version is free for all legacy devices as an incentive (but not for VBar EVO or VBar NEO), for anyone who purchases a VBar Control radio.

Software Highlights:

• Setup, programming and adjusting of VBar-controlled models accomplished directly via VBar Control radio.
• Readily understandable graphic user interface.
• Easy programming for new models.
• Easy ESC programming of many current ESCs directly from the radio.
• Up to eight parameters can be tuned simultaneously using the optional inputs, with adjustable limitation of the the respective range of values.
• Bank switching with three banks (fourth Bank Autorotation optional).
• Real time logging and real time graphic vibration analysis available on display.
• Graphical telemetry log analyzer for stored flights (overview, energy consumption, event-log) directly readable on the display.
• Create your own screendesign directly on the touchscreen display.
• Full manual available on the radio by means of context sensitive help.
• Easy bind process, allows bind and fly of any model equipped with VLink (e.g. a buddy‘s heli) with your own transmitter (Model Sharing).
• Automatic power-on, if an already bound model is switched on.
• Several telemetry functions are available, such as voltages, current, rpm, speed, temperature and power consumption of the batteries (may need additional hardware).
• Multiple timer functions available with warnings and reminders via sound, voice, or vibration output.
• Wireless buddy boxing with two VBar Control radios, fully configurable.
• Cloud functionality (e.g. for archiving, to manage model photos; usage optional).
• Access our App Store and do over-the-air online-updates via WiFi*.
• Over-the-air online-update your VBar EVO and VBar NEO-flybarless systems via WiFi* (for purchases, a device with internet access and web browser is required).
  
  Hardware Highlights:

• Extra bright capacitive 5.8 inch multi-touch color display, with ambient-light sensor to automatically control the brightness.
• Very good readability even in bright sunlight.
• WiFi module connects to your WiFi network at home as well as to your personal hotspot on the go.
• Very fast start-up time, from off to fully operational in one second.
• High perfomance low power controller for best user experience and long runtimes.
• Reliable 80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system.
• Unlimited model memory.
• Virtually unlimited number of control channels.
• High range, low latency, antenna diversity both on transmitter and receiver.
• Intelligent antenna monitoring and management.
• Fully equipped with four 3-position switches, two 3-position quick-break-switches as well as six rotary inputs (four trim wheels, two rotating knobs), all fully programmable.
• Precision gimbals with four ball bearings, fully adjustable.
• Collective stick can be equipped with optional throw limiter.
• Delicate rubber lining for comfortable, slip-free and safe holding.
• Well-balanced with two-point neck-strap attachment, no additional retainer bracked required.
• Large 2 Watt loudspeaker for alarms and voice output.
• Vibration alarm (adjustable).
• Memory accessible as a USB memory stick, no drivers needed.
• Built-in Lithium Polymer battery allows for long run times.
• Charge through USB connector.

* Online features require a WiFi connection and a device with internet access. Data transfers may cause additional costs, depending on your mobile data plan.

NEW: Fully digital gimbals

• Tough yet lightweight design
• High precision readout with 8 parameters per axis
• 3D sensor sampling (3 Hall sensors per axis)
• Fully integrated in VBar Control EVO software
• all-digital signal path, drift-free
• virtually latency-free
• supreme resolution
• perfectly linear
• temperature compensation per sensor
• earth magnetic field compensation
• super sensitive throughout the whole stick range
• factory calibrated
• adjustable stick response from smooth to extremely fast
• Made in Germany
  
  VBar Control EVO Highlights

• New processor: 600 MHz (Touch: 150 MHz), current chip production
• Latest technology ARM Cortex M7 with large caches and low power consumption
• Graphics processor (GPU)
• Internal flash disk 4 GB (Touch: 128 MB)
• Faster WIFI 802/b/g/n (3 times faster than before), very fast connection
• USB data transfers 10 times faster
• Improved Touch Display
• USB-C fast charging with 15 W with any off-the-shelf USB-C charger
• Extra fast and extra precise reaction to stick inputs due to faster processing

Note: The use of the VBar Control radio requires a VBar EVO or NEO or an RX Satellite with a legacy VBar or Mini-VBar unit with firmware version 6.0 PRO or higher. This version is free for all legacy devices as an incentive (but not for VBar EVO or VBar NEO), for anyone who purchases a VBar Control radio.

Software Highlights:

• Setup, programming and adjusting of VBar-controlled models accomplished directly via VBar Control radio.
• Readily understandable graphic user interface.
• Easy programming for new models.
• Easy ESC programming of many current ESCs directly from the radio.
• Up to eight parameters can be tuned simultaneously using the optional inputs, with adjustable limitation of the the respective range of values.
• Bank switching with three banks (fourth Bank Autorotation optional).
• Real time logging and real time graphic vibration analysis available on display.
• Graphical telemetry log analyzer for stored flights (overview, energy consumption, event-log) directly readable on the display.
• Create your own screendesign directly on the touchscreen display.
• Full manual available on the radio by means of context sensitive help.
• Easy bind process, allows bind and fly of any model equipped with VLink (e.g. a buddy‘s heli) with your own transmitter (Model Sharing).
• Automatic power-on, if an already bound model is switched on.
• Several telemetry functions are available, such as voltages, current, rpm, speed, temperature and power consumption of the batteries (may need additional hardware).
• Multiple timer functions available with warnings and reminders via sound, voice, or vibration output.
• Wireless buddy boxing with two VBar Control radios, fully configurable.
• Cloud functionality (e.g. for archiving, to manage model photos; usage optional).
• Access our App Store and do over-the-air online-updates via WiFi*.
• Over-the-air online-update your VBar EVO and VBar NEO-flybarless systems via WiFi* (for purchases, a device with internet access and web browser is required).
  
  Hardware Highlights:

• Extra bright capacitive 5.8 inch multi-touch color display, with ambient-light sensor to automatically control the brightness.
• Very good readability even in bright sunlight.
• WiFi module connects to your WiFi network at home as well as to your personal hotspot on the go.
• Very fast start-up time, from off to fully operational in one second.
• High perfomance low power controller for best user experience and long runtimes.
• Reliable 80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system.
• Unlimited model memory.
• Virtually unlimited number of control channels.
• High range, low latency, antenna diversity both on transmitter and receiver.
• Intelligent antenna monitoring and management.
• Fully equipped with four 3-position switches, two 3-position quick-break-switches as well as six rotary inputs (four trim wheels, two rotating knobs), all fully programmable.
• Precision gimbals with four ball bearings, fully adjustable.
• Collective stick can be equipped with optional throw limiter.
• Delicate rubber lining for comfortable, slip-free and safe holding.
• Well-balanced with two-point neck-strap attachment, no additional retainer bracked required.
• Large 2 Watt loudspeaker for alarms and voice output.
• Vibration alarm (adjustable).
• Memory accessible as a USB memory stick, no drivers needed.
• Built-in Lithium Polymer battery allows for long run times.
• Charge through USB connector.

* Online features require a WiFi connection and a device with internet access. Data transfers may cause additional costs, depending on your mobile data plan.

NEW: Fully digital gimbals

• Tough yet lightweight design
• High precision readout with 8 parameters per axis
• 3D sensor sampling (3 Hall sensors per axis)
• Fully integrated in VBar Control EVO software
• all-digital signal path, drift-free
• virtually latency-free
• supreme resolution
• perfectly linear
• temperature compensation per sensor
• earth magnetic field compensation
• super sensitive throughout the whole stick range
• factory calibrated
• adjustable stick response from smooth to extremely fast
• Made in Germany
  
  VBar Control EVO Highlights

• New processor: 600 MHz (Touch: 150 MHz), current chip production
• Latest technology ARM Cortex M7 with large caches and low power consumption
• Graphics processor (GPU)
• Internal flash disk 4 GB (Touch: 128 MB)
• Faster WIFI 802/b/g/n (3 times faster than before), very fast connection
• USB data transfers 10 times faster
• Improved Touch Display
• USB-C fast charging with 15 W with any off-the-shelf USB-C charger
• Extra fast and extra precise reaction to stick inputs due to faster processing

Note: The use of the VBar Control radio requires a VBar EVO or NEO or an RX Satellite with a legacy VBar or Mini-VBar unit with firmware version 6.0 PRO or higher. This version is free for all legacy devices as an incentive (but not for VBar EVO or VBar NEO), for anyone who purchases a VBar Control radio.

Software Highlights:

• Setup, programming and adjusting of VBar-controlled models accomplished directly via VBar Control radio.
• Readily understandable graphic user interface.
• Easy programming for new models.
• Easy ESC programming of many current ESCs directly from the radio.
• Up to eight parameters can be tuned simultaneously using the optional inputs, with adjustable limitation of the the respective range of values.
• Bank switching with three banks (fourth Bank Autorotation optional).
• Real time logging and real time graphic vibration analysis available on display.
• Graphical telemetry log analyzer for stored flights (overview, energy consumption, event-log) directly readable on the display.
• Create your own screendesign directly on the touchscreen display.
• Full manual available on the radio by means of context sensitive help.
• Easy bind process, allows bind and fly of any model equipped with VLink (e.g. a buddy‘s heli) with your own transmitter (Model Sharing).
• Automatic power-on, if an already bound model is switched on.
• Several telemetry functions are available, such as voltages, current, rpm, speed, temperature and power consumption of the batteries (may need additional hardware).
• Multiple timer functions available with warnings and reminders via sound, voice, or vibration output.
• Wireless buddy boxing with two VBar Control radios, fully configurable.
• Cloud functionality (e.g. for archiving, to manage model photos; usage optional).
• Access our App Store and do over-the-air online-updates via WiFi*.
• Over-the-air online-update your VBar EVO and VBar NEO-flybarless systems via WiFi* (for purchases, a device with internet access and web browser is required).
  
  Hardware Highlights:

• Extra bright capacitive 5.8 inch multi-touch color display, with ambient-light sensor to automatically control the brightness.
• Very good readability even in bright sunlight.
• WiFi module connects to your WiFi network at home as well as to your personal hotspot on the go.
• Very fast start-up time, from off to fully operational in one second.
• High perfomance low power controller for best user experience and long runtimes.
• Reliable 80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system.
• Unlimited model memory.
• Virtually unlimited number of control channels.
• High range, low latency, antenna diversity both on transmitter and receiver.
• Intelligent antenna monitoring and management.
• Fully equipped with four 3-position switches, two 3-position quick-break-switches as well as six rotary inputs (four trim wheels, two rotating knobs), all fully programmable.
• Precision gimbals with four ball bearings, fully adjustable.
• Collective stick can be equipped with optional throw limiter.
• Delicate rubber lining for comfortable, slip-free and safe holding.
• Well-balanced with two-point neck-strap attachment, no additional retainer bracked required.
• Large 2 Watt loudspeaker for alarms and voice output.
• Vibration alarm (adjustable).
• Memory accessible as a USB memory stick, no drivers needed.
• Built-in Lithium Polymer battery allows for long run times.
• Charge through USB connector.

* Online features require a WiFi connection and a device with internet access. Data transfers may cause additional costs, depending on your mobile data plan.

NEW: Fully digital gimbals

• Tough yet lightweight design
• High precision readout with 8 parameters per axis
• 3D sensor sampling (3 Hall sensors per axis)
• Fully integrated in VBar Control EVO software
• all-digital signal path, drift-free
• virtually latency-free
• supreme resolution
• perfectly linear
• temperature compensation per sensor
• earth magnetic field compensation
• super sensitive throughout the whole stick range
• factory calibrated
• adjustable stick response from smooth to extremely fast
• Made in Germany
  
  VBar Control EVO Highlights

• New processor: 600 MHz (Touch: 150 MHz), current chip production
• Latest technology ARM Cortex M7 with large caches and low power consumption
• Graphics processor (GPU)
• Internal flash disk 4 GB (Touch: 128 MB)
• Faster WIFI 802/b/g/n (3 times faster than before), very fast connection
• USB data transfers 10 times faster
• Improved Touch Display
• USB-C fast charging with 15 W with any off-the-shelf USB-C charger
• Extra fast and extra precise reaction to stick inputs due to faster processing

Note: The use of the VBar Control radio requires a VBar EVO or NEO or an RX Satellite with a legacy VBar or Mini-VBar unit with firmware version 6.0 PRO or higher. This version is free for all legacy devices as an incentive (but not for VBar EVO or VBar NEO), for anyone who purchases a VBar Control radio.

Software Highlights:

• Setup, programming and adjusting of VBar-controlled models accomplished directly via VBar Control radio.
• Readily understandable graphic user interface.
• Easy programming for new models.
• Easy ESC programming of many current ESCs directly from the radio.
• Up to eight parameters can be tuned simultaneously using the optional inputs, with adjustable limitation of the the respective range of values.
• Bank switching with three banks (fourth Bank Autorotation optional).
• Real time logging and real time graphic vibration analysis available on display.
• Graphical telemetry log analyzer for stored flights (overview, energy consumption, event-log) directly readable on the display.
• Create your own screendesign directly on the touchscreen display.
• Full manual available on the radio by means of context sensitive help.
• Easy bind process, allows bind and fly of any model equipped with VLink (e.g. a buddy‘s heli) with your own transmitter (Model Sharing).
• Automatic power-on, if an already bound model is switched on.
• Several telemetry functions are available, such as voltages, current, rpm, speed, temperature and power consumption of the batteries (may need additional hardware).
• Multiple timer functions available with warnings and reminders via sound, voice, or vibration output.
• Wireless buddy boxing with two VBar Control radios, fully configurable.
• Cloud functionality (e.g. for archiving, to manage model photos; usage optional).
• Access our App Store and do over-the-air online-updates via WiFi*.
• Over-the-air online-update your VBar EVO and VBar NEO-flybarless systems via WiFi* (for purchases, a device with internet access and web browser is required).
  
  Hardware Highlights:

• Extra bright capacitive 5.8 inch multi-touch color display, with ambient-light sensor to automatically control the brightness.
• Very good readability even in bright sunlight.
• WiFi module connects to your WiFi network at home as well as to your personal hotspot on the go.
• Very fast start-up time, from off to fully operational in one second.
• High perfomance low power controller for best user experience and long runtimes.
• Reliable 80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system.
• Unlimited model memory.
• Virtually unlimited number of control channels.
• High range, low latency, antenna diversity both on transmitter and receiver.
• Intelligent antenna monitoring and management.
• Fully equipped with four 3-position switches, two 3-position quick-break-switches as well as six rotary inputs (four trim wheels, two rotating knobs), all fully programmable.
• Precision gimbals with four ball bearings, fully adjustable.
• Collective stick can be equipped with optional throw limiter.
• Delicate rubber lining for comfortable, slip-free and safe holding.
• Well-balanced with two-point neck-strap attachment, no additional retainer bracked required.
• Large 2 Watt loudspeaker for alarms and voice output.
• Vibration alarm (adjustable).
• Memory accessible as a USB memory stick, no drivers needed.
• Built-in Lithium Polymer battery allows for long run times.
• Charge through USB connector.

* Online features require a WiFi connection and a device with internet access. Data transfers may cause additional costs, depending on your mobile data plan.

NEW: Fully digital gimbals

• Tough yet lightweight design
• High precision readout with 8 parameters per axis
• 3D sensor sampling (3 Hall sensors per axis)
• Fully integrated in VBar Control EVO software
• all-digital signal path, drift-free
• virtually latency-free
• supreme resolution
• perfectly linear
• temperature compensation per sensor
• earth magnetic field compensation
• super sensitive throughout the whole stick range
• factory calibrated
• adjustable stick response from smooth to extremely fast
• Made in Germany
  
  VBar Control EVO Highlights

• New processor: 600 MHz (Touch: 150 MHz), current chip production
• Latest technology ARM Cortex M7 with large caches and low power consumption
• Graphics processor (GPU)
• Internal flash disk 4 GB (Touch: 128 MB)
• Faster WIFI 802/b/g/n (3 times faster than before), very fast connection
• USB data transfers 10 times faster
• Improved Touch Display
• USB-C fast charging with 15 W with any off-the-shelf USB-C charger
• Extra fast and extra precise reaction to stick inputs due to faster processing

Note: The use of the VBar Control radio requires a VBar EVO or NEO or an RX Satellite with a legacy VBar or Mini-VBar unit with firmware version 6.0 PRO or higher. This version is free for all legacy devices as an incentive (but not for VBar EVO or VBar NEO), for anyone who purchases a VBar Control radio.

Software Highlights:

• Setup, programming and adjusting of VBar-controlled models accomplished directly via VBar Control radio.
• Readily understandable graphic user interface.
• Easy programming for new models.
• Easy ESC programming of many current ESCs directly from the radio.
• Up to eight parameters can be tuned simultaneously using the optional inputs, with adjustable limitation of the the respective range of values.
• Bank switching with three banks (fourth Bank Autorotation optional).
• Real time logging and real time graphic vibration analysis available on display.
• Graphical telemetry log analyzer for stored flights (overview, energy consumption, event-log) directly readable on the display.
• Create your own screendesign directly on the touchscreen display.
• Full manual available on the radio by means of context sensitive help.
• Easy bind process, allows bind and fly of any model equipped with VLink (e.g. a buddy‘s heli) with your own transmitter (Model Sharing).
• Automatic power-on, if an already bound model is switched on.
• Several telemetry functions are available, such as voltages, current, rpm, speed, temperature and power consumption of the batteries (may need additional hardware).
• Multiple timer functions available with warnings and reminders via sound, voice, or vibration output.
• Wireless buddy boxing with two VBar Control radios, fully configurable.
• Cloud functionality (e.g. for archiving, to manage model photos; usage optional).
• Access our App Store and do over-the-air online-updates via WiFi*.
• Over-the-air online-update your VBar EVO and VBar NEO-flybarless systems via WiFi* (for purchases, a device with internet access and web browser is required).
  
  Hardware Highlights:

• Extra bright capacitive 5.8 inch multi-touch color display, with ambient-light sensor to automatically control the brightness.
• Very good readability even in bright sunlight.
• WiFi module connects to your WiFi network at home as well as to your personal hotspot on the go.
• Very fast start-up time, from off to fully operational in one second.
• High perfomance low power controller for best user experience and long runtimes.
• Reliable 80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system.
• Unlimited model memory.
• Virtually unlimited number of control channels.
• High range, low latency, antenna diversity both on transmitter and receiver.
• Intelligent antenna monitoring and management.
• Fully equipped with four 3-position switches, two 3-position quick-break-switches as well as six rotary inputs (four trim wheels, two rotating knobs), all fully programmable.
• Precision gimbals with four ball bearings, fully adjustable.
• Collective stick can be equipped with optional throw limiter.
• Delicate rubber lining for comfortable, slip-free and safe holding.
• Well-balanced with two-point neck-strap attachment, no additional retainer bracked required.
• Large 2 Watt loudspeaker for alarms and voice output.
• Vibration alarm (adjustable).
• Memory accessible as a USB memory stick, no drivers needed.
• Built-in Lithium Polymer battery allows for long run times.
• Charge through USB connector.

* Online features require a WiFi connection and a device with internet access. Data transfers may cause additional costs, depending on your mobile data plan.

NEW: Fully digital gimbals

• Tough yet lightweight design
• High precision readout with 8 parameters per axis
• 3D sensor sampling (3 Hall sensors per axis)
• Fully integrated in VBar Control EVO software
• all-digital signal path, drift-free
• virtually latency-free
• supreme resolution
• perfectly linear
• temperature compensation per sensor
• earth magnetic field compensation
• super sensitive throughout the whole stick range
• factory calibrated
• adjustable stick response from smooth to extremely fast
• Made in Germany
  
  VBar Control EVO Highlights

• New processor: 600 MHz (Touch: 150 MHz), current chip production
• Latest technology ARM Cortex M7 with large caches and low power consumption
• Graphics processor (GPU)
• Internal flash disk 4 GB (Touch: 128 MB)
• Faster WIFI 802/b/g/n (3 times faster than before), very fast connection
• USB data transfers 10 times faster
• Improved Touch Display
• USB-C fast charging with 15 W with any off-the-shelf USB-C charger
• Extra fast and extra precise reaction to stick inputs due to faster processing

Note: The use of the VBar Control radio requires a VBar EVO or NEO or an RX Satellite with a legacy VBar or Mini-VBar unit with firmware version 6.0 PRO or higher. This version is free for all legacy devices as an incentive (but not for VBar EVO or VBar NEO), for anyone who purchases a VBar Control radio.

Software Highlights:

• Setup, programming and adjusting of VBar-controlled models accomplished directly via VBar Control radio.
• Readily understandable graphic user interface.
• Easy programming for new models.
• Easy ESC programming of many current ESCs directly from the radio.
• Up to eight parameters can be tuned simultaneously using the optional inputs, with adjustable limitation of the the respective range of values.
• Bank switching with three banks (fourth Bank Autorotation optional).
• Real time logging and real time graphic vibration analysis available on display.
• Graphical telemetry log analyzer for stored flights (overview, energy consumption, event-log) directly readable on the display.
• Create your own screendesign directly on the touchscreen display.
• Full manual available on the radio by means of context sensitive help.
• Easy bind process, allows bind and fly of any model equipped with VLink (e.g. a buddy‘s heli) with your own transmitter (Model Sharing).
• Automatic power-on, if an already bound model is switched on.
• Several telemetry functions are available, such as voltages, current, rpm, speed, temperature and power consumption of the batteries (may need additional hardware).
• Multiple timer functions available with warnings and reminders via sound, voice, or vibration output.
• Wireless buddy boxing with two VBar Control radios, fully configurable.
• Cloud functionality (e.g. for archiving, to manage model photos; usage optional).
• Access our App Store and do over-the-air online-updates via WiFi*.
• Over-the-air online-update your VBar EVO and VBar NEO-flybarless systems via WiFi* (for purchases, a device with internet access and web browser is required).
  
  Hardware Highlights:

• Extra bright capacitive 5.8 inch multi-touch color display, with ambient-light sensor to automatically control the brightness.
• Very good readability even in bright sunlight.
• WiFi module connects to your WiFi network at home as well as to your personal hotspot on the go.
• Very fast start-up time, from off to fully operational in one second.
• High perfomance low power controller for best user experience and long runtimes.
• Reliable 80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system.
• Unlimited model memory.
• Virtually unlimited number of control channels.
• High range, low latency, antenna diversity both on transmitter and receiver.
• Intelligent antenna monitoring and management.
• Fully equipped with four 3-position switches, two 3-position quick-break-switches as well as six rotary inputs (four trim wheels, two rotating knobs), all fully programmable.
• Precision gimbals with four ball bearings, fully adjustable.
• Collective stick can be equipped with optional throw limiter.
• Delicate rubber lining for comfortable, slip-free and safe holding.
• Well-balanced with two-point neck-strap attachment, no additional retainer bracked required.
• Large 2 Watt loudspeaker for alarms and voice output.
• Vibration alarm (adjustable).
• Memory accessible as a USB memory stick, no drivers needed.
• Built-in Lithium Polymer battery allows for long run times.
• Charge through USB connector.

* Online features require a WiFi connection and a device with internet access. Data transfers may cause additional costs, depending on your mobile data plan.

NEW: Fully digital gimbals

• Tough yet lightweight design
• High precision readout with 8 parameters per axis
• 3D sensor sampling (3 Hall sensors per axis)
• Fully integrated in VBar Control EVO software
• all-digital signal path, drift-free
• virtually latency-free
• supreme resolution
• perfectly linear
• temperature compensation per sensor
• earth magnetic field compensation
• super sensitive throughout the whole stick range
• factory calibrated
• adjustable stick response from smooth to extremely fast
• Made in Germany
  
  VBar Control EVO Highlights

• New processor: 600 MHz (Touch: 150 MHz), current chip production
• Latest technology ARM Cortex M7 with large caches and low power consumption
• Graphics processor (GPU)
• Internal flash disk 4 GB (Touch: 128 MB)
• Faster WIFI 802/b/g/n (3 times faster than before), very fast connection
• USB data transfers 10 times faster
• Improved Touch Display
• USB-C fast charging with 15 W with any off-the-shelf USB-C charger
• Extra fast and extra precise reaction to stick inputs due to faster processing

Note: The use of the VBar Control radio requires a VBar EVO or NEO or an RX Satellite with a legacy VBar or Mini-VBar unit with firmware version 6.0 PRO or higher. This version is free for all legacy devices as an incentive (but not for VBar EVO or VBar NEO), for anyone who purchases a VBar Control radio.

Software Highlights:

• Setup, programming and adjusting of VBar-controlled models accomplished directly via VBar Control radio.
• Readily understandable graphic user interface.
• Easy programming for new models.
• Easy ESC programming of many current ESCs directly from the radio.
• Up to eight parameters can be tuned simultaneously using the optional inputs, with adjustable limitation of the the respective range of values.
• Bank switching with three banks (fourth Bank Autorotation optional).
• Real time logging and real time graphic vibration analysis available on display.
• Graphical telemetry log analyzer for stored flights (overview, energy consumption, event-log) directly readable on the display.
• Create your own screendesign directly on the touchscreen display.
• Full manual available on the radio by means of context sensitive help.
• Easy bind process, allows bind and fly of any model equipped with VLink (e.g. a buddy‘s heli) with your own transmitter (Model Sharing).
• Automatic power-on, if an already bound model is switched on.
• Several telemetry functions are available, such as voltages, current, rpm, speed, temperature and power consumption of the batteries (may need additional hardware).
• Multiple timer functions available with warnings and reminders via sound, voice, or vibration output.
• Wireless buddy boxing with two VBar Control radios, fully configurable.
• Cloud functionality (e.g. for archiving, to manage model photos; usage optional).
• Access our App Store and do over-the-air online-updates via WiFi*.
• Over-the-air online-update your VBar EVO and VBar NEO-flybarless systems via WiFi* (for purchases, a device with internet access and web browser is required).
  
  Hardware Highlights:

• Extra bright capacitive 5.8 inch multi-touch color display, with ambient-light sensor to automatically control the brightness.
• Very good readability even in bright sunlight.
• WiFi module connects to your WiFi network at home as well as to your personal hotspot on the go.
• Very fast start-up time, from off to fully operational in one second.
• High perfomance low power controller for best user experience and long runtimes.
• Reliable 80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system.
• Unlimited model memory.
• Virtually unlimited number of control channels.
• High range, low latency, antenna diversity both on transmitter and receiver.
• Intelligent antenna monitoring and management.
• Fully equipped with four 3-position switches, two 3-position quick-break-switches as well as six rotary inputs (four trim wheels, two rotating knobs), all fully programmable.
• Precision gimbals with four ball bearings, fully adjustable.
• Collective stick can be equipped with optional throw limiter.
• Delicate rubber lining for comfortable, slip-free and safe holding.
• Well-balanced with two-point neck-strap attachment, no additional retainer bracked required.
• Large 2 Watt loudspeaker for alarms and voice output.
• Vibration alarm (adjustable).
• Memory accessible as a USB memory stick, no drivers needed.
• Built-in Lithium Polymer battery allows for long run times.
• Charge through USB connector.

* Online features require a WiFi connection and a device with internet access. Data transfers may cause additional costs, depending on your mobile data plan.

The TBS CROSSFIRE is a long range R/C link based on the newest RF technology, capable of self-healing two-way communications and range beyond comprehension. With a sensitivity of -130dB, full RF-side diversity, tiny receivers for FPV quads, the TBS CROSSFIRE contains the most modern technology to provide a superior long range control link

The Crossfire Micro TX borrows the core technology from its larger brother, but is a JR-module transmitter simplified to the most sought-after features, at a killer price! For people looking to do extreme long range flights beyond 15-20km, the Crossfire TX is still the way to go. For anyone looking to penetrate buildings, fly mini quads or just explore your surroundings a few kilometers away, the Micro TX is the perfect companion. It will still go out up to 40km, just like its bigger brother. But it costs less than half the price.

 Features:

•     Long range, adaptive and robust remote control system for your aircraft
•     Immune to on-board noise
•     Two-way communication link with real-time link vitals and telemetry
•     Self-healing & frequency hopping (DSSS, FHSS)
•     Adaptive bandwidth control and range optimization
•     RX beacon mode to recover your downed aircraft
•     Super easy binding and configuration via built-in display of your R/C
•     Low latency, 150Hz update rate (3x faster than typical RC links) control for perfect immersive feeling
•     Two receiver models: 8 port Diversity Rx, 4 port Mini-receiver (4g weight!)
•     8 or 12ch output via SBUS/PPM/CRSF on both receivers
•     Ability to fly with multiple friends at the same time (10 or more)
•     Selectable RF power from 25mW to 250mW (local restrictions apply)
•     Transmitter LED shows link health
•     Micro-receiver for smaller drones. Smaller than you think!
•     Software updates via RF Link

 
Technical specifications:

•     Frequency Band: 868MHz- EU
•     Input Voltage: 6.0 - 13V
•     Connector : USB-C
  
•     Power consumption: 1.1W (@10mW) - 2W (@100mW)
•     Dimensions: 65 x 48 x 22 mm (JR module size)
•     Weight: 48g

Package includes

• 1 x TBS Crossfire Micro TX V2
• 3 x TBS Crossfire Nano RX
• 3 x TBS Crossfire Micro Receiver Antenna
• 3 x TBS Crossfire Immortal T V2 Antenna
• 1 x Taranis QX7 Mod
• 3 x Cables and Shrink Tubes set

The LiPo Safe sack/bag is a hi-tech bag made of space-age materials that has the ability to contain a lithium polymer battery fire or charging mishap. Place your lithium polymer battery inside the LiPo Safe and extend the charging wires through the top flap. Charge the lipo batteries when they’re in the LiPo Safe for peace of mind and greater safety. In the case of a lithium polymer battery charging mishap, the LiPo Safe’s fire-resistant material mitigates the ferocity of the LiPoly blaze inside and vents the smoke outside the LiPo Safe.

This is a long version of the Safe product, measuring internal dimensions of 340x70x65mm, fits long Stick Lipos 12s and even some 14S packs- verify the size of your lipo to be sure it fits inside the bag.

The LiPo Safe is sealed with a thick, industrial strength, Velcro flap. The current LiPo Safe is designed to handle a lithium polymer battery mishap

Before using the LiPo Safe you must read and understand the LiPo Safe Safety Instructions. We assume absolutely no liability for any damages of any kind - even with proper use. When using the LiPo Safe, you must always remember to abide by safe lithium polymer battery charging and safety rules and never leave charging li-polymer batteries unattended. Never leave damaged lipos unattended. Always use the LiPo Safe on a non-flammable surface and in a ventilated area. Avoid damage to the LiPo Safe and not use the LiPo Safe if it is damaged.

Instructions to use:

Ensure that charger rate is properly set and polarity is correct

1. Attach charging leads to battery
2. Place battery in LiPo Safe towards the bottom
3. Place LiPo Safe on non-flammable surface
4. Route charge leads through vent at the top seam of the LiPo Safe
5. Close top flap of LiPo Safe and press hook and loop closure fully closed
6. Charge battery using proper charging practices
7. Always practice extreme caution when charging and never leave a charging battery unattended

Please check the Video showing the use of Lipo Safe

This is a pack of 8 RCPROPLUS SUPRA-X REB6808 PRO D6 6mm Bullet Connector

Set including 8 PAIRS.

Featuring a unique patented banana plug lock design, these Pro-D6 connectors securely lock in place handling quick movements and vibrations, commonly found during extreme 3D flights, without coming apart. The stronger jacket and snaps extends the advantages of the previous generation of Supra X Connectors and makes them better.

These connectors are a great solution for your high current and high voltage demands offering a large, low resistance surface patch for efficient power transfer. The 24K Gold Plated bullet plugs feature a recessed wire cavity and solder windows making assembly hassle free, while the sheath uses high temperature capable, impact-resistant plastic imported from Japan.

Cover material:IDEMITSU plastic
Banana connector diameter:6mm
Suggested Wires:8AWG-10AWG
Capacity (Continuous):200A
Capacity (Burst):240A
Banana connector material:Class A Cooper C54 Series
Plating:24K Gold / Flash

Features:
Connection between battery and ESC
Can be used for 4 batteries and 4 ESCs (or 4 charger cables)

Package Included:
4 x Set
8 x 6mm Female& Male Bullet Connector

FPV x230 Racer With Gimble,1080P Wide Angle HD Camera RC Quadcopter RTF

• Built-in 120° wide angle and 1920 x 1080P HD camera to get the high quality shooting;
• Equipped with 2200mAh smart flight battery.
• Flip 360° steadily;
• Real-time transmission for FPV action video.

Remote control:

• Built-in video transmitter to improve the transmission quality and reliability of communication;
• Equipped with camera and operation button to control easily.

Package Included:

• 1 x X230 Multicopter
• 1 x Battery
• 2 x ABS 5030 propeller
• 1 x Balance charger
• 1 x Charger cable
• 1 x Adapter
• 1 x 4 pins connection wire
• 1 x Screw bag

Soldering Station ZD-937, black, 150°C - 450°C, 48W,ESD-protection, with pre-selection buttons 100, 200, 300°C.

The station is ideal for home elektronics, school, workshop, service, production and lab.

Among the easy and quick temperature adjustment with the up-/down-buttons in 1°C- and 10°C-steps, it is possible to pre-select 100°C, 200°C and 300°C with the related button.

• Compact, solid and insulated housing.
• Station and soldering iron pod are arrangeable seperately.
• Complete with soldering iron pod and soldering sponge.
• LCD display with ilumination shows must- and actual value.
• Energy display
• 3 pre-selectionable fixed temperatures
• Electronical sensor
• Temperature controll
• Short heating-up time thanks to its generous designed power supply
• Powerful 48W soldering iron for a wide range of application
• Temperature adjustment with buttons from 150 to 450°C, 1°C and 10°C steps
• Optical and accoustic error message in case of malfunction
• ESD protection

Technical Specification:

• Input Voltage: 230V (220-240V), 50 Hz
• Power of soldering iron: 48W
• Fuse: T 1A/250V
• 150°C-450°C temperature adjustment with 1°C- and 10°C-steps
• Display accuracy: 5%
• LC-Display with 3 1/2 digits
• Dimension WxHxD: 210x125x135mm
• Weight 1,8kg

Delivery:

• Soldering station ZD-937
• Soldering iron pod with drawer and soldering sponge
• Soldering iron with tip 1,6 mm
• German and english manual

This "economy" spanner set includes just about all the sizes you will ever need on a model heli.
Ideal for you field box and building bench.

Sizes included are : 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm.
Set of 10 spanners

TITAN DC5 w/ DJI Air Unit BNF built for  the amazing new DJI FPV system, this quad makes flying FPV truly breathtaking. With the 720p video shown at 120fps through the goggles, DJI has set the bar at a new high for clarity and image quality in an FPV system. This TITAN DC5 BNF is 5 inch quad which is no prop in view, equipped SucceX-D F7(50A 4-in-1 ESC) Stack and popular XING motor, everything you just need to bind and fly!

This model can accept up to 6s, but the motors mounted are designed to be used with 4S.

You can use Any radio you want, you will need to add your receiver and bind and calibrate it.

If you use your own DJI Remote Controller, you need to update beta-flight to 10.6.0 to set up and bind your DJI remote controller.

ELECTRONICS // SucceX-D F7 Stack (50A 4-in-1 ESC):

• Universal USB Type C connector instead of micro USB
• Plug-and-Play. No need to solder tiny wires
• Designed to support DJI Digital FPV.

BNF // Parts lists

• 1x TITAN DC5 HD Frame
• 2x TPU camera side plate soft mount
• 1x iFlight Lipo Strap
• 2x Nazgul 5140 Propeller (Set of 4 - Color May Vary)
• 4x XING 2207 Motor Unibell (4S 2450KV)
• 1x SucceX- F7 Flight Controller
• 1x SucceX BLHeli32 50A 4-in-1 ESC 2-6S

Sky hero Anakin Club FPV racer 215mm -5"’’ ARF combo, Our combo delivered with Best components we beleive are on the market today. We beleive that quality assembly can be done by customer, there are a lot of advantages to do so.
See the specs below.

• Anakin club racer Frame kit Xnova 2204-2300Kv motors, esc, props- Included and factory preinstalled.
     Note: if you choose other motors, you will need to assemble the kit yourself, you will receive all components, but not ARF version.
• CC3D Metal Case controller included
• PDB-Bec
• FPV Camera included
• RADIO link AT9 with receiver Sky hero version (white edition ) but not installed

Not included:

• Lipo charger
• Battery 3s 1300-1500 mah
• VTX - optional

Sky hero did it again, with the latest drone technology, you have the possibility to fly the freedom of birds.
With competition racing and performance within the DNA of SKY HERO, this machine was created as serious racer for those who want the best.
Club-racer- inherits the amazing design of the original sky hero Anakin, with new evolved concept.
Strengthened with flat arms.
this was developed with the vision that FPV racers deserve a near-indestructible machine, agile racer they can trust.
Locked in trajectories and customizable.

General specs of Club racer versions.

• Full carbon frame- Crash resistant.
• Innovative abutted A frame design.
• Minimized vibrations distribution, Optimized shock absorption
• 3K 4mm Carbon
• Sandwitched frame plates

• Fully protected electronics
• Optimized Shape, size and frame thickness, delivering outstanding strength-to weight ratio
• Responsiveness- so rigid, that you feel "At one" with your frame.

ESSENTIALS

•     Entirely designed for racing
•     Flat arms conception for highest impact resistance
•     Simplified option for easy components replacement
•     Low drag, for higher speeds
•     Electronics fully protected

KEY FACTORS

•     Premium choice for FPV
•     High wind resistance
•     Super fast

Customer expected to add and program the machine, its not coming pre-programmed